What to make a gun barrel from. The birth of a trunk, the manufacturing process in pictures
Most often, on postcards for Cosmonautics Day you can see an astronaut or a rocket. Therefore, in today’s master class we will prepare a flat craft that can be used to decorate a finished postcard, wall newspaper for this holiday, or simply made as an independent craft. Use colored paper of different colors when making your applique so that the end result looks beautiful and bright. Therefore, prepare paper and other materials in advance.
Necessary materials:
- colored paper in blue, red, orange and yellow shades;
- PVA glue;
- scissors;
- HB pencil;
- ruler.
Stages of making a flat paper rocket:
- Cut out a long strip of blue construction paper. It will become the main part of the rocket.
- Now we will measure a few centimeters from the top on both sides to prepare the bow. Make small notes with a pencil.
- Now from the side part we make a cut with scissors to the upper center point. We get this pointed part of the rocket.
- Now we will cut out two large parts from red paper to create the nose and tail wings of our rocket. To choose the right size, we outline the main part of the craft in blue onto red half-cardboard. Next, we finish drawing the side parts and cutting out the details.
- Glue the main part of the blue rocket onto the red parts.
- Let's make cockpit windows from red paper. First, let's draw circles of small diameter (less than the width of the body) on red half-cardboard. There should be three such circles in total.
- We cut out and glue the portholes one after another in the rocket. There should be equal distance between the circles.
- Then we cut out the flame that will come from the rocket nozzles below. It will have three shades. So we select paper of three colors from red to yellow. It would be great if there were more shades! Then we draw flames of different sizes on paper so that we can glue them to each other later. Cut it out.
- Glue all the several multi-colored parts of the flame to each other.
- Attach the finished flame to the back of the rocket.
Here you have a wonderful flat craft made from colored paper in the shape of a multi-colored rocket.
Making rockets with your own hands from scrap materials is a popular hobby among residents of Western countries. In Russia, home “rocket science” is not in such high demand, but even here we meet enthusiasts. And in most cases, these are not students of technical specialties, but parents of little fidgets and young dreamers. Only loving mothers, fathers and creative teachers-educators know how to make a rocket with their own hands from paper, cardboard, bottles, so that it not only involves children in space travel, but also takes off spectacularly. Using diagrams and models, brave experimenters will make a rocket that flies out of matches and foil. Don't believe me? Experience our master classes with photos and videos for yourself!
How to make a space rocket with your own hands from scrap materials - a step-by-step master class for children and parents
To give your child a new exciting toy, you don’t have to visit stores and auctions of expensive children’s goods. You can make a bright, interesting and, most importantly, safe thing with your own hands. For example, an intergalactic rocket for entertaining role-playing games and virtual travel. And our step-by-step master class “How to make a space rocket with your own hands from scrap materials” will simplify and speed up the collective creative process of parents and children.
Necessary materials for a rocket from scrap materials
- plastic bottle
- colored terry sock
- glue gun
- sheet of red felt
- thick foil
- cardboard
- scissors
- red and yellow yarn
- paper towel tube
- thin cord
Step-by-step master class for children on creating a space rocket from scrap materials
- Wash the empty plastic bottle with warm water and dry. Place a colored sock over a clean, dry container. Tie it with a thin cord under the bottom of the bottle and cut off the tail.
- Cut out two circles with a diameter of 5 cm from red felt. Glue the figures onto the finished base of the rocket, imitating portholes. On the red circles, use a glue gun to secure the same round parts made of thick foil, but with a smaller diameter. Approximately - 3.5 cm.
- Draw three “fins” on a piece of white cardboard. Cut out the shapes and glue them point down to the rocket on three sides.
- Cut a ring 5-6 cm wide from a cardboard tube (from toilet paper or paper towels). Wrap the piece in thick foil. Wind the red woolen threads around your palm, then glue the resulting skein on one side to the previously prepared part.
- Do the same with yellow yarn. This way you can make the lower part of the rocket with decorative flames. Secure the part with a glue gun to the bottom of the bottle. This completes the step-by-step master class for children and parents “How to make a space rocket with your own hands from scrap materials”!
How to make a bright rocket out of cardboard and paper with your own hands - diagrams and models
If preschoolers are delighted and delighted by a small toy rocket, the size of a bottle, then older children will love the “full-length” spacecraft. Having your own intergalactic ship will allow younger schoolchildren to feel like real captains and show courage, bravery and bravery, as the main traits of a man’s character.
How to properly make a large model of a rocket out of paper and cardboard with your own hands for a child, see the next master class with diagrams, photos and videos.
Necessary materials for a DIY paper and cardboard rocket model
- carton boxes
- colored paper
- yoghurt cups
- disposable plates
- plastic covers and buttons
- letters and numbers on adhesive backing
- bobbins of thread
- flower pot
- foam circle and pieces of fabric
- letter stencils
- markers
- scissors
- pencil
- satin ribbons
- thick foil
- glue gun
A simple diagram of how to make a rocket model from cardboard and paper with your own hands
- Start creating a bright rocket with the help of the kids. Let children help you with their favorite toy tools. Use a large household appliance box as the base of the rocket. Ideally - from the refrigerator.
- Make the top of the rocket from a painted flower pot, disposable dishes and plastic spools of sewing thread. Decorate the details with pieces of satin ribbons and voluminous stars made of colored paper.
- Cut a round window in the front wall of the rocket. Wrap the foam circle with multi-colored satin ribbons and glue it to the panel in place of the porthole. Glue a few spools of thread a little higher and mark them with adhesive numbers. This will make it easier for the little pilot to count down the time before launch. Below the window, place another instrument panel to make the rocket more interesting.
- On the right side of the space rocket, equip the fuel tank lid with bright plastic buttons. Plastic bottle caps, thread spools, and old buttons from various devices will be useful for this.
- Don't forget about the front door. Draw a large oblong rectangle on the back wall of the rocket and cut three sides (bottom, top and right). The remaining left side will serve as a curtain. Decorate the captain's door with decorative elements.
- Draw two “legs” on thick cardboard, cut out the parts and cover them with foil. Fix the elements on the bottom of the right and left walls of the rocket. At this point the spacecraft is ready. For a clear picture of how to make a bright rocket out of cardboard and paper with your own hands, see the model diagram.
How to make a rocket with your own hands so that it flies - step-by-step instructions with photos and videos
Even using the most primitive waste materials (candy boxes, cardboard napkin tubes, etc.), you can make an unusual rocket with your own hands that will fly. Of course, she will not be able to surf the expanses of the universe, but she will boldly go on a journey through the children's room. Use our step-by-step instructions with photos and videos to make a nice gift for your kids for the significant Cosmonautics Day.
Necessary materials for a DIY flying paper rocket
- paper towel tube
- thick cardboard
- scissors
- pencil
- brushes and gouache paints
- permanent marker
- yarn
- drinking straw
Step-by-step instructions with photos and videos for creating a flying rocket with your own hands
How to make a simple bottle rocket with a launcher to make it take off
If the kids have grown up a long time ago and are no longer interested in toy models made of cardboard, invite them to make a simple rocket with a trigger mechanism that can fly high and impressively. Rest assured, the trick of launching a spacecraft will cause wild delight even in an adult. What can we say about impressionable teenagers?
Materials needed for a simple bottle rocket with launcher
- thick cardboard
- thin cardboard
- scotch
- plastic bottle
- plasticine
- wine stopper
- pencil
- scissors
- Bicycle Pump
Step-by-step instructions for creating a simple rocket with a trigger mechanism
- Roll a sheet of thin cardboard into a cone. Trim the edge to make the shape even.
- Cover the finished cone with colored tape, this will increase its resistance to water.
- Wash and dry the empty bottle. Paint the container in any color, if desired, draw an emblem or leave an inscription.
- Glue the main part of the rocket - the cone - with liquid silicone to the bottom of the bottle. Try to make the structure as smooth as possible.
- Cut out 3-4 right triangles from thicker cardboard. Glue the parts to the bottle. This will give the rocket tail fins. Ideally, the “legs” should end at the level of the extreme point of the container neck.
- Weight the bottom of the rocket. To do this, wrap a piece of plasticine around the neck of the bottle and disguise the load with adhesive tape.
- Pour 1 liter of water into the bottle.
- Use a needle to make a thin hole in the wine cork. The hole size should not exceed the diameter of the bicycle pump needle.
- Carefully insert the cork into the neck of the bottle. Insert the bicycle pump needle firmly so that it does not pop out.
- Take the rocket with the neck up and connect it to the pump. Turn the spacecraft over and position it so that it does not fly towards you.
- Holding it with your hand, inflate the rocket with air. Then release the craft and continue pumping air. A simple bottle rocket with a launcher will take off as soon as the cork can no longer hold the pressure.
How to make a rocket from matches, foil and other improvised materials with your own hands according to video
And for those who want to remember a fun and carefree childhood, being already old enough, we have prepared another master class with a video on making a flying rocket from matches, paper clips and foil. This time you won’t have to make crafts from cardboard, paper, bottles and other scrap materials. It is enough just to remember that very simple model that flies, and carefully reproduce it, observing safety precautions. And if you can’t remember the step-by-step instructions in your memory, watch the video “How to make a rocket from matches, foil and other materials with your own hands.”
The idea for this easy and time-consuming fake was born when February 23 was just around the corner. My husband served in the missile forces, so my daughter and I decided to make a rocket. I will say right away that this work of art can be made by a child himself, starting from the age of 5. Younger kids can build a rocket with a little help from mom in 15 minutes.
For counterfeiting you need:
Colored paper;
Any glue;
Toilet paper roll;
Scissors.
My daughter told me to use a toilet paper roll for this job. This unique little thing saves a lot of time. If you don’t have a sleeve on hand, you’ll have to make one yourself from cardboard.
Let's get to work. First we need to cover the cylinder with paper. The color of the paper depends on your desire. I took an orange piece of paper and wrapped it around the sleeve, measuring the required height and width. I cut out a rectangle and pasted it over the blank.
Now we make a cone out of purple paper. To do this, you need to roll the sheet at an angle and glue it. Carefully trim off the excess paper.
Now it is necessary to connect the rocket base blank with the nose part. Before doing this, we cut the lower edge of the cone along the perimeter so that when gluing, we bend the paper. We treat the upper part of the sleeve with glue and carefully, putting on the cone, glue it. At the same time, press the edges well. This is what should come out:
Then my daughter and I cut out circles from purple paper and glued them onto the rocket. These are the “windows” of our space structure.
From small rectangles we made blanks for the “wings”, which serve as a support for the fake. After gluing them to the rocket, we cut them into triangles. This is how our fake acquired its natural appearance.
Now all that remains is to shorten the “nose” of our rocket a little. You just need to cut it and cover it with paper. That's all the work! It’s worth saying that my daughter and I spent no more than 15 minutes of our time.
When performing this craft, your child will strengthen their skills in handling scissors and glue, and also develop their imagination. This modest little thing, made by the hands of your baby, can melt the biggest heart.
For many people, both adults and children, the world of paper and cardboard creativity offers ample opportunities to realize their ideas. If you need to bring a composition to a thematic lesson, exhibition, competition at school, or you simply want to please your loved ones with an original homemade product, then a DIY paper and cardboard rocket for children will be an excellent solution to the task.
It can be performed using any of the techniques presented below, each of which involves the use of a specific set of tools, consumables and accessories to decorate your creation. Here you will definitely find a suitable craft for Cosmonautics Day, for kindergarten and school. In addition to making a rocket, you and your child can learn the poems for Cosmonautics Day, which we posted earlier.
Using a sample, you can make a beautiful model without extra effort and in a short time. To ensure that within a quarter of an hour there is a rocket on your table that can impress a schoolchild or preschooler, you need to follow the instructions exactly and prepare in advance:
- colored paper;
- PVA glue;
- black cardboard;
- pencil, ruler, scissors.
The instructions offered for children can be used in a labor lesson at school or in a creative activity in kindergarten. If you need to complete your homework on creating a model of a rocket, then the option presented below is also suitable for execution - the finished space composition will definitely be favorably assessed by the teacher.
Step-by-step production of an interstellar ship:
Having made a launch pad, it can be used for successful flights and landings of both the manufactured rocket and similar models.
Applique paper rocket with diagrams and templates for children (need to be printed, cut and glued)
Another easy paper rocket craft can be made for kindergarten or school. It’s not difficult to make; even a preschooler can do it. Below I will add templates and diagrams of the rocket that you will need to print, cut and glue.
To make a rocket we need:
- colored paper
- scissors
- pencil
- PVA glue
Step-by-step instruction:
Below, as promised, I post diagrams and templates for making a rocket from paper and cardboard:
Step-by-step master class: paper rocket using origami technique
If you want to take the craft to a kindergarten, craft it with a child aged 3-4 years, then this is very easy to do with the help of lightweight double-sided cardboard. To make it interesting for your child, use colored material.
Perform all actions step by step:
To decorate origami, you can make an applique - glue a raging flame, observation windows, and even place a passenger in one of the windows.
How to make a rocket out of a toilet paper roll for kids
To make a craft, you will need to take three cardboard rolls left over from using toilet paper, colored and silver tape. The standard scheme for creating a rocket is as follows:
The final step is to glue the red fabric or paper strips inside the cone. They will simulate flames escaping from a rocket.
So another rocket made from scrap materials (toilet paper rolls) is ready. Below you can see another option for making a rocket out of cardboard.
Crafts for Cosmonautics Day: paper and cardboard rockets for kindergarten and school
Below I will publish some interesting ideas for crafts for Cosmonautics Day, which comes on April 12. All of the listed crafts can be made independently with your child for kindergarten and school. After this, I will continue to publish step-by-step master classes on how else you can make rockets with children.
How to make a craft rocket out of corrugated cardboard for February 23 and Cosmonautics Day
At thematic exhibitions dedicated to special occasions, models made of corrugated cardboard always attract attention and arouse interest. Together with your child you can make a three-dimensional rocket. The kid will certainly be happy to join in the process and will delight you with his diligence.
A rocket is made from cardboard as follows:
Such a craft for Cosmonautics Day - April 12 or for Defender of the Fatherland Day can last for many years. You don’t have to worry at all that it will break or become deformed. Even if the baby gets enough of playing with a cardboard rocket, it will definitely take pride of place in the home interior - on a table or shelf.
How to make a rocket from a bottle and scrap materials that flies at home
Functionality is what boys love about technology. If the task is to send a rocket, well, if not into space, then at least high into the sky, then you can make a ship from a couple of plastic bottles and a wine cork, which will maintain pressure in the unit.
See what this model looks like in reality and what pirouettes it can perform. Of course, you can’t take such a rocket to school, but in the summer you can play in the yard with friends - it will be a lot of fun.
Do-it-yourself large (volumetric) paper rocket for children
Such an unusual solution, how to make an entire rocket house at home, will definitely appeal to every child. Small models, of course, bring a lot of joy to kids, but participation in the implementation of a large-scale project causes real delight in children. In addition, then in a homemade building you can play and feel like a real astronaut going to the Moon, into interstellar space or a traveler striving for distant and mysterious planets.
So, how to make such a space house for children with your own hands?
To make a rocket, you will need to take cardboard (quite thick) and colored paper. The adult's task is to draw, cut out and glue the parts of the spaceship. Let the children decorate the house on their own - give them the opportunity to draw, glue stickers and use other prepared decor for decoration.
This is what the diagram looks like.
Another model made using similar technology.
And this is a master class in creating a three-dimensional homemade product. The plot describes a very interesting idea of creating a paper rocket. Just don’t forget that working with thick cardboard requires the participation of an adult, and children from 12 years old can make such a space house. Younger children are involved only as assistants to parents.
How to make a water rocket for April 12th
Rocket made of colored paper at home: applique
This option for creating a spaceship is quite feasible for children aged 5-7 years. The application and templates can be used by educators and primary school teachers, additional education teachers and creative parents. The craft for children offered here will be an excellent interior decoration, gift, themed poster or postcard for Cosmonautics Day. To make an applique from geometric shapes you will need the following materials and tools:
- white pencil;
- PVA glue;
- scissors;
- colored paper;
- black cardboard.
The application is done step by step. In order for your child to make a paper rocket, you need to control the entire process. The technology looks like this:
A child can make such an application either at home or at school during the lesson. He will definitely succeed and will become the real pride of his owner.
As you can see, there are many options for making crafts on the theme of space. You just have to decide on the appropriate one and give your child the opportunity to realize his creative potential. The finished copy - a rocket made of paper and cardboard with your own hands for children - will bring joy to the child, excite his imagination and encourage him to conquer new heights, because now he will have his own ship, which can send its owner to any corner of the galaxy.
How to make a rocket from scrap materials for children
And finally, a couple more video ideas on how you can make a rocket yourself with children from scrap materials
Thank you for your interest in the article “Do-it-yourself paper and cardboard rocket for children: how to make a rocket craft with your own hands.” If you found it useful, please do the following:
- Share with friends using the social media button
- Write a comment at the bottom of the page - share your tips, express your opinion
- Check out similar articles below, you might find them helpful.
All the best!
Haven't you ever wanted to become an astronaut and fly into space on board a rocket? To become an astronaut, you need to spend many years of training and education. In the meantime, you can make and launch your own homemade rocket in the yard, which, thanks to our instructions, you can make with your own hands.
To make a homemade rocket you will need:
A4 sheet of paper
From 35mm film (with a lid that fits inside the opening of the can, not over its circumference)
Adhesive tape
Scissors
Water
Effervescent tablet of an antacid (a neutralizing agent used to calm an upset stomach)
Eye protection: sunglasses or safety glasses
How to build a homemade rocket?
1. Make an enlarged copy of the rocket so that it fits on a sheet of A4 paper. Cut out the template details.
2. Remove the lid from the film can. Using adhesive tape, glue the large one cut from the template to the jar. Make sure that the opening end of the can is directly against the edge of the paper.
3. Now twist the paper around the jar to make a cylinder and glue it together duct tape. The jar should be at the bottom of the cylinder.
4. Take the nose cone piece. Using duct tape, glue the ends together to create a cone shape. Glue the cone to the top of the paper cylinder.
5. Take the stabilizer templates and fold along the dotted lines. Glue it to the rocket body. Now your rocket is ready to launch!
6. Take your homemade rocket outside and wear glasses to protect your eyes.
7. Turn the homemade rocket upside down and fill the jar halfway with water.
8. Drop half an antacid tablet into the container and quickly close the lid.
9. Set up your homemade rocket on a launch platform, such as a concrete driveway or paved area. Step back and wait. In a few seconds yours will take off!
How a homemade rocket takes off and works
When the tablet is placed in a jar of water, it begins to dissolve and fizz. The hissing produces more gas inside the jar, but when the lid is closed, it cannot escape. Eventually something has to happen! That's why the lid shoots off the jar. and gas rush outward and downward, pushing the can along with the rocket attached to it upward.
Real rockets work on the same principle. Instead of water and an antacid tablet, the rocket's fuel tank contains a mixture of different fuels that causes an explosion. An explosion erupts from below the fuel tank, forcing the rocket upward.
The first rocket to launch anything into space was the R-7 launch vehicle. With its help, on October 4, 1957, the USSR launched Sputnik 1, the first artificial Earth satellite (AES).